BPCTS - K-210 (LAPPING COMPOUND)
- MSDS: BPCTS
- Manufacturer: KAY INDUSTRIAL DIAMOND CORP
- Product Name: K-210 (LAPPING COMPOUND)
- National Stock Number: 5350-00N027511
Product Identification
Product ID:K-210 (LAPPING COMPOUND)
MSDS Date:10/01/1990
FSC:5350
NIIN:00N027511
MSDS Number: BPCTS
Responsible Party
DEERFIELD BEACH, FL 33442
US
Emergency Phone: 305-481-1600/800-327-8982
Info Phone: 305-481-1600/800-327-8982
Cage: KAYIN
Contractor
Telephone: 305-481-1800
Cage: KAYIN
Ingredients
PETROLEUM OIL; (LIGHT PARAFFINIC DISTILLATE)
CAS: 64741-89-5
RTECS: PY8041500
GREASE, PETROLEUM
CAS: 8009-03-8
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INGEST/SKIN ABSORPTION/INHAL: NO
EVIDENCE OF ADVERSE EFFECTS FROM AVAILABLE INFORMATION. SKIN
CONTACT: UNLIKELY TO PRODUCE ANY SIGNIFICANT EFFECTS. EYE CONTACT:
MAY CAUSE PAIN W/EXCESS TEAR FORMATION AND MILD REDDENING.
OVEREXPOSURE TO VAPORS GENERATED AT HIGH TEMPERATURE MAY RESULT IN
EYE AND (EFTS OF OVEREXP)
Explanation of Carcinogenicity:CAS#64741-89-5 IS LISTED BY THE RTECS AS
AN IARC GROUP 1 CARCINOGENS.
Effects of Overexposure:HLTH HAZ: RESPIRATORY TRACT IRRITATION AND IN
THE INHALATION OF HARMFUL AMOUNTS OF MATERIAL.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:SKIN: WASH WITH SOAP AND WATER. EYES: FLUSH WITH WATER FOR A
MINIMUM OF 15 MINUTES. INHAL: REMOVE TO FRESH AIR. INGEST: VOMITING
MAY BE INDUCED. CALL MD IMMEDIATELY .
Fire Fighting
Flash Point Method:CC
Flash Point:400F,204C
Extinguishing Media:ALL PURPOSE TYPE FOAM. USE CO*2 OR DRY CHEMICAL FOR
SMALL FIRES.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. DO NOT DIRECT A SOLID STREAM OF H*2O/FOAM INTO HOT BURNING POOLS,
AS THIS MAY CAUSE FROTHING (SUPP DATA)
Unusual Fire/Explosion Hazard:DURING A FIRE, NO*X MAY BE PRODUCED.
Accidental Release
Spill Release Procedures:CONTAIN SPILL, ADVISE EPA, STATE AGENCY IF
REQUIRED. ABSORB ON INERT MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORAGE NFPA CLASS 111B. WASH
THOROUGHLY AFTER HANDLING.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:GENERAL ROOM VENTILATION IS SATISFACTORY FOR STORAGE AND
HANDLING AT ROOM TEMPERATURE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
FIRE FIGHT PROC: AND INCREASE FIRE INTENSITY.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:550F,288C
Melt/Freeze Pt:M.P/F.P Text:100F,38C
Vapor Pres:<0.0001
Vapor Density:>16
Spec Gravity:0.866 @ 25C
Evaporation Rate & Reference:NIL TO NONE
Solubility in Water:NIL
Appearance and Odor:COLOR VARIES, DEPENDING OF MICROSCOPIC GRADE
Percent Volatiles by Volume:NIL
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:FOLLOW FEDERAL, STATE AND LOCAL REGULATIONS. NOT
A RCRA HAZARDOUS WASTE IF UNCONTAMINATED.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.